Physical size and weight
| Net weight |
22.414
kg |
| Outer diameter D |
190
mm |
Other properties
| Dimension D |
190
mm |
| Dimension D tolerance |
±0.1
|
| Dimension G thread |
M8x1
|
| Dimension H tolerance |
± 0.2
|
| Dimension S |
11
mm |
| Dimension S1 |
18
mm |
| Dimension Tk |
165
mm |
| Dimension dW |
120
mm |
| Dimension h |
35
mm |
| Dimension h1 |
30
mm |
| Dynamic load capacity C |
40000
N |
| Maximum operating temperature |
+ 100
|
| Maximum permissible linear speed vmax |
2
m/s |
| Minimum operating temperature |
- 30
|
| Nominal size |
120
|
| Note: Maximum permissible speed vmax |
In case of prolonged periods of use at speeds above 1 m/s, an increase in temperature and reduction in service life is to be expected depending on the load.
|
| Note: Permissible operating temperature (min. ... max.) |
At temperatures above 100 °C, only bright metal ball transfer units without a felt seal should be used. Make allowance for reduction in load capacity. Use high-temperature lubricant! Follow the manufacturer’s instructions! The existing lubricant oil may have to be washed out.
|
| Operating temperature (min. … max.) |
-30 °C ... +100 °C
|
| Static load capacity C0 |
100000
N |
Description
Ball transfer unit with solid steel housing
Bright metal, balls made from anti-friction bearing steel
Size = 120
Bottom hole
With wiper
With lube connection
Features
- With solid steel housing and cover
- For very high loads and coarse dirt
- With wiper
- Surface in bright metal
- Balls made from antifriction bearing steel 1.3505