Physical size and weight
| Net weight |
0.028
kg |
| Outer diameter D |
24
mm |
Other properties
| Dimension D |
24
mm |
| Dimension D tolerance |
-0.13
|
| Dimension D1 |
31
mm |
| Dimension DB |
24
mm |
| Dimension DB tolerance |
+ 0.5
|
| Dimension b |
5.5
mm |
| Dimension dW |
15.875
mm |
| Dimension h |
9.5
mm |
| Dimension h tolerance |
± 0.2
|
| Dimension s |
1.5
mm |
| Dynamic load capacity C |
70
N |
| Maximum operating temperature |
+ 30
|
| Maximum permissible linear speed vmax |
2
m/s |
| Nominal size |
15
|
| Note: Dynamic load capacity C |
at 20 °C
|
| Note: Maximum permissible speed vmax |
In case of prolonged periods of use at speeds above 1 m/s, an increase in temperature and reduction in service life is to be expected depending on the load.
|
| Note: Permissible operating temperature (min. ... max.) |
For temperatures over 100°C, only load balls made from bare metal without a felt seal may be used. Take into account the reduction in load capacity. Use high-temperature lubricant! Follow the instructions of the manufacturer! The existing lubricant oil may have to be washed out.
|
| Note: Static load capacity C0 |
at 20 °C
|
| Operating temperature (min. … max.) |
+30 °C
|
| Product information |
Ball transfer unit with bottom hole on request
|
| Static load capacity C0 |
70
N |
Description
Ball transfer unit, with clip as fastening element
Galvanized cover and housing, balls made from anti-friction bearing steel
Size = 15
Load ball made from plastic
With felt seal, preserved
Features
- With fastening element
- Easily mountable and extractable from the load side
- Fixing is by means of spring clips, which permit generous tolerances in the mounting hole
- Reinforced cover to withstand heavy impact loads
- Load ball made from PA66
- Cover and housing galvanized
- Balls made from antifriction bearing steel 1.3505
- With dry felt seal