Other properties
| Category |
A
|
| Dimension B P9 |
5
mm |
| Dimension D1 g6 |
38
mm |
| Dimension D4 |
4
mm |
| Dimension L |
64
mm |
| Dimension L tolerance |
± 0.1
|
| Dimension L11 |
20
mm |
| Dimension L11 tolerance |
± 0.2
|
| Dimension L6 |
22
mm |
| Dimension L7 |
9.5
mm |
| Dimension T1 |
3
mm |
| Dimension d1 |
24
mm |
| Dimension d2 |
21.9
mm |
| Direction of lead |
Right
|
| Dynamic load capacity C |
18800
N |
| Maximum operating temperature |
+ 80
|
| Maximum permissible linear speed vmax (m/min) |
60
m/min |
| Maximum storage temperature |
+ 80
|
| Minimum operating temperature |
- 10
|
| Minimum storage temperature |
- 15
|
| Nominal size |
25 x 10R x 3 - 4
|
| Note: Dynamic load capacity C |
The load capacities are valid for tolerance grade T3 and T5 only. For other tolerance grades, please take into account the correction factor f<sub>ac</sub> (see General Technical Notes and Information "Technical Data", Technical Notes).
|
| Note: Maximum permissible speed vmax |
See "Characteristic speed d<sub>0 </sub>• n" (see General Technical Notes and Information, "Technical Data" (Technical Notes), and "Critical speed n<sub>cr</sub>" (see General Technical Notes and Information, "Project planning notes")
|
| Note: Permissible operating temperature (min. ... max.) |
Permissible operating temperatures Ball screw assemblies permit operation at continuous temperatures of up to 80 °C with temporary peaks of 100 °C, measurements taken on the outer shell of the nut in each case.
|
| Note: Static load capacity C0 |
The load capacities are valid for tolerance grade T3 and T5 only. For other tolerance grades, please take into account the correction factor f<sub>ac</sub> (see General Technical Notes and Information "Technical Data", Technical Notes).
|
| Nut type |
ZEM-E-S cylindrical single nut
|
| Operating temperature (min. … max.) |
-10 °C ... +80 °C
|
| Screw drive seal |
With seal
|
| Series |
Standard series
|
| Static load capacity C0 |
27000
N |
| Storage temperature (min. … max.) |
-15 °C ... +80 °C
|
Description
Cylindrical single nut ZEM-E-S with standard seal and standard axial clearance
Nominal diameter d0 = 25
Lead P = 10 (right)
Ball diameter Dw = 3
Number of ball track turns i = 4
Features
- Rexroth connection dimensions
- With seals
- With left-hand version in some cases
- Preload class: C0, C00, C1, C2, C3
- Tolerance grade: T3 (for sizes as per the product overview for screws, see general technical notes and information, “Product description”), T5, T7, T9
CAD (2)
Catalog (1)
Manual (1)