Physical size and weight
| Net weight |
83.2
g |
| Shaft diameter d |
12
mm |
| Length of linear bushing |
61
mm |
| Outer diameter D |
22
mm |
Other properties
| Version |
Corrosion-resistant
|
| Format of linear bushings |
T - Tandem
|
| Series |
Standard (metal)
|
| Type |
Linear bushing
|
| Seal |
2 integrated wiper seals
|
| Lubrication |
Not lubricated
|
| Maximum dynamic load capacity Cmax |
750
N |
| Maximum acceleration rate amax |
100
m/s² |
| Maximum permissible linear speed vmax |
2.5
m/s |
| Permissible ambient temperature (min. ... max.) |
-10 °C ... +80 °C
|
| Note: permissible ambient temperature (min. ... max.) |
Only unsealed linear bushings with steel ball retainers may be used at higher temperatures. Make allowance for reductions in load capacity.
|
| Static longitudinal moment load capacity ML0 |
11
Nm |
| Footnote maximum dynamic load capacity Cmax |
The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26.
|
| Footnote minimum dynamic load capacity Cmin |
The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26.
|
| Footnote shaft radial clearance h6 |
Determined from working bore diameter and shaft tolerance statistics. Recommended housing bore tolerance: H6 or H7
|
| Footnote friction force FR |
Frictional drags generated by linear bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication.
|
| Breakaway force |
6
N |
| Dimension C |
61
|
| Dimension C1 |
45.8
mm |
| Tolerance C1 |
- 0.3
|
| Dimension C2 |
1.3
mm |
| Dimension D |
22
mm |
| Dimension D1 |
21
mm |
Description
standard linear bushing
Standard (metal)
Tandem
Shaft diameter d = 12
With two seals
Version: Rust-resistant
Features
- Rugged all-metal design with steel ball retainer for harsh environments and heavy contamination
- Many pockets acting as lubricant reservoirs for extended lubrication intervals or lubrication for life
- For use in woodworking, foundries, cement plants
- Stainless steel for the medical, chemistry and food industries
- Integrated wiper seals
- Pockets collect any dirt that may have worked its way in to prevent the linear bushing from jamming.
- Hardened and machined outer sleeve made of stainless steel comparable to 1.4125
- Ball retainer made of stainless steel comparable to 1.4301
- Balls made of stainless steel comparable to 1.4125
- Retaining rings for ball retainer made of stainless steel comparable to 1.4006
Manual (2)
Guide lineari con manicotti a sfere
(ALL)
|
Sign in
|
|
Linear bushings
(EN)
|
Sign in
|
CAD (2)