Other properties
| Category |
B
|
| Dimension D1 g6 |
16
mm |
| Dimension D5 |
28
mm |
| Dimension D6 |
22
mm |
| Dimension D7 |
3.4
mm |
| Dimension L |
23.5
mm |
| Dimension L14 |
19
mm |
| Dimension L3 |
6
mm |
| Dimension L4 |
17.5
mm |
| Dimension d1 |
7.5
mm |
| Dimension d2 |
6.3
mm |
| Direction of lead |
Right
|
| Dynamic load capacity C |
2500
N |
| Maximum operating temperature |
+ 80
|
| Maximum permissible linear speed vmax (m/min) |
30
m/min |
| Maximum storage temperature |
+ 80
|
| Minimum operating temperature |
- 10
|
| Minimum storage temperature |
- 15
|
| Nominal size |
8 x 5R x 1,588 - 3
|
| Note: Dynamic load capacity C |
The load capacities are valid for tolerance grade T5 only. For other tolerance grades, please take into account the correction factor f<sub>ac</sub> (see General Technical Notes and Information "Technical Data", Technical Notes).
|
| Note: Maximum permissible speed vmax |
See "Characteristic speed d<sub>0 </sub>• n" (see General Technical Notes and Information, "Technical Data" (Technical Notes), and "Critical speed n<sub>cr</sub>" (see General Technical Notes and Information, "Project planning notes")
|
| Note: Permissible operating temperature (min. ... max.) |
Permissible operating temperatures Ball screw assemblies permit operation at continuous temperatures of up to 80 °C with temporary peaks of 100 °C, measurements taken on the outer shell of the nut in each case.
|
| Note: Static load capacity C0 |
The load capacities are valid for tolerance grade T5 only. For other tolerance grades, please take into account the correction factor f<sub>ac</sub> (see General Technical Notes and Information "Technical Data", Technical Notes).
|
| Nut type |
FEM-E-B single nut with flange
|
| Operating temperature (min. … max.) |
-10 °C ... +80 °C
|
| Screw drive seal |
With seal
|
| Series |
Miniature series
|
| Static load capacity C0 |
2650
N |
| Storage temperature (min. … max.) |
-15 °C ... +80 °C
|
Description
Single nut with flange FEM-E-B with standard seal and standard axial clearance
Nominal diameter d0 = 8
Lead P = 5 (right)
Ball diameter Dw = 1.588
Number of ball track turns i = 3
Features
- Rexroth connection dimensions flange type B
- With seals
- Preload class: C0, C00
- Except for size 8 x 2.5/5 and 12 x 5/10: Preload class C1
- Tolerance grade: T5, T7, T9
- Preload class: C0, C00, C1, C2, C3
CAD (2)
Catalog (1)
Manual (1)